Cleaning your bathroom is unlikely to be a chore you relish. After all, who’s ever claimed to love scrubbing toilets or tackling mildew stains? However, that doesn’t mean it needs to be a completely thankless task or a particularly time-consuming one. Check out these 14 bathroom cleaning hacks with less effort.

1. Clean Your Shower With Vinegar

The key to sparkling shower tiles is already in your pantry: white vinegar.

“Heat the vinegar in the microwave and spray it on while it’s hot,” suggests Brad Roberson, president of Glass Doctor, a Neighborly Company. Roberson suggests adding a tablespoon of dish soap to the mixture if the smell bothers you, noting that this can also help cut through tough grime.

2. Scrub Mildew With A Dish Brush

If you’ve got mildew or surface mold in your bathroom, a clean dish brush is a tool you need to combat it. Roberson suggests combining six cups of warm water and a quarter cup of bleach to create a mold-busting cleaner.

3. Get Rid Of Mold Stains With Baking Soda

For those stubborn mold and mildew stains that your dish brush and bleach solution won’t touch, try applying a paste of baking soda and water. “Cover the stain with the paste and allow it to stay on the stain for three to four hours,” following up with a thorough rinse, suggests Roberson.

4. Use Baking Soda And Vinegar To Deodorize A Drain

If your drain is emitting some unpleasant odors, a simple mixture of baking soda and vinegar can fix that in no time.

“The combination of vinegar and baking soda begins to fizz and can help break up any congealed grease in your drain,” explains Joshua Miller, VP of Technical Training at Rainbow International Restoration. Miller recommends pouring one cup of baking soda and two cups of white vinegar down the drain, then flush it with hot water after half an hour.

5. Use Dental Floss To Clean The Small Parts Of Your Sink

Some parts of your sink are simply too small for the average cleaning tool to reach.

Luckily, there’s a solution right inside your medicine cabinet: “Dental floss is a great way to remove buildup in the nooks and crannies of the faucet and handles,” says Kim Burckhardt, owner of Office Pride Commercial Cleaning Services of Westminster-Eldersburg.

6. Use Dryer Sheets To Nix Soap Scum

Can’t seem to get rid of that soap scum on your shower or tub? Instead of a sponge, reach for a dryer sheet.
“Add a few drops of water to a dryer sheet and gently rub the area. Rinse the residue off and the majority of the scum should be gone,” suggests James Conner, VP of operations at Molly Maid.

7. Use A Denture Tablet To Clean Your Toilet

Not in the mood to scrub your toilet? Then let a denture tablet do the hard work for you. “Drop one in, let it do its job, and then flush to get rid of toilet bowl stains and rust,” suggests Conner.

8. Squeegee Your Bathroom Window

Finding that your usual glass cleaner isn’t cutting it when it comes to getting your bathroom window clean? Using a squeegee instead can help keep those panes clear and free of water spots.

9. Rub The Lemon Over Chrome To Wipe Off Water Spots

Though water sports are unavoidable in places where water is constantly running (like the shower and the sink), it’s surprisingly simple and cheap to get rid of them. All you have to do is rub lemon over your stained chrome fixtures and the pesky spots should disappear instantly. Plus, using this citrus-as-cleanser will mask any unpleasant smells.

10. Restore Your Mirror’s Shine With Black Tea

Young happy black man cleaning the bathroom mirror. You want your bathroom mirror to be spotless so that you know what you actually look like before leaving the house—but all too often, it’s fogged up with water stains, dust, and other debris.

The solution? Black tea! All you have to do is combine a cup of boiling water with a few bags of black tea, let it cool, and use the resulting solution to clean your cloudy mirror. The tannic acid in the tea will dissolve any dirt, leaving you with a spotless surface that tells no lies.

11. Put Your Toothbrush Holder In The Dishwasher

It’s easy to let your toothbrush holders become disgustingly dirty. But washing the accessory is barely a chore: all you have to do is throw it in the dishwasher. Really, that’s it!

12. Sweep Your Bathtub Clean

There’s no need to waste time scrubbing your entire bathtub with a sponge. Instead, cover it in soap, then sweep and scrub with a clean broom and rinse until all of the suds are gone. The broom will clean as effectively as a sponge would, but using the large long-handled brush will require half as much effort.

13. Use Cotton Balls To Clean Pesky Bathtub Corners

The corners of the tub are always the hardest to clean. Luckily, there’s a simple solution for this, and it’s probably already sitting in your medicine cabinet. Just soak some cotton balls in the tub cleaner of your choice and let them sit on the edges of your tub overnight. By morning, those tub edges will be clean as a whistle!

14. Combine Baking Soda And Bleach To Clean The Grout

Grout – the stuff used to fill the gaps between tiles-looks good when it’s clean, but dirt easily sneaks into those small crevices, making the walls look dirty in an otherwise spotless bathroom. To restore your tiles (and the spaces between them) to their original color, apply a paste made out of 3/4 cup baking soda and 1/4 cup bleach to the grout, let it sit for 30 minutes, and remove with a scrub brush or cloth to reveal sparkling clean walls. This is an awesome bathroom cleaning tip.

Our social channel: Eva & Beauty

SEE MORE: Tips and Hacks

At times, taking care of a home can be pretty overwhelming, especially if you have a baby. So that, household hacks are very necessary to us. There are plenty of awesome household tips and tricks below to help you in your daily life.

1. Clothing Cleaner Dispensers

This is one of the great household hacks that I know. So instead of keeping them in ugly containers, you can easily store the liquids in easily accessible mason jars. Then you won’t have to lug out the heavy containers every time you do the laundry.

2. Clean Mirrors with Black Tea

Using strongly brewed black tea is an awesome hack to clean your mirrors. Who would have thought?

3. No Drip Paint Trick

If you plan on retouching a room, try this great no-drip paint trick with a large rubber band. Now that’s easy.

4. Lotion Bottle to Phone Charging Holder

If you want a safe place to keep your phone charged and out of the way, try this tutorial which will show you how to create a phone charging holder out of a lotion bottle.

5. Router Disguise

Routers are pretty darn ugly, but an awesome way to keep them out of the way and in disguise is to hide them in a fake book.

6. Lemon and Salt Scrub

With the help of the citric acid from the lemon and the scrubbing action of the salt, you can kill stains in your sinks and showers instantly.

7. Dust Fans with Pillow Case

Ever notice how the dust on ceiling fans builds up fast and just looks plain gross? Well, an easy way to clean it is to use a pillowcase to take it off. The Dust will fall into the pillowcase and you won’t have to deal with it floating in the air after wiping it off.

8. Clean Your Shower Curtain in the Washer

Do you know how shower curtains can get filmy and nasty? Well an easy way to clean them is to just pop them in the washer and let it do all the work!

9. Clean Shower Head with Vinegar

Just soaking your shower head in some vinegar for 20 minutes can get all of the grime build-ups off easily.

Sometimes we need just the right hacks to help make our lives just a bit easier. Especially with a home. It can get cluttered or disorganized so easily that it can be a bit overwhelming or discouraging. But with the right tips and tricks, we can make things so much simpler.

If you have any household hacks yourself, let the comments down below! I’d love to hear about them!

Our social channel: Eva & Beauty

SEE MORE: Tips and Hacks

If your iron is sticky, leaves yellow streaks on clothes, or has a lot of scorch marks or mineral deposits, it’s time to clean. There are many ways to make your iron look like new using products you may already have on hand! There are easy and effective 6 ways to clean your iron’s soleplate, water reservoir and steam holes.

1. Baking soda paste

Apply the baking soda mixture to the stains on the soleplate to clean them. First, mix 1 tablespoon (15 mL) distilled water and 2 tablespoons (34 g) baking soda in a small bowl to create a paste that will stick to the iron. Turn off the iron and let it cool, applying the mixture to areas with residue or residue (or the entire soleplate for a general clean). Leave the patch on for a few minutes, then wipe off with a clean, damp cloth.

If any baking soda gets into the steam holes, use a cotton swab dipped in distilled water or white vinegar to clear the blockage.

2. White vinegar

Wipe the soleplate with a cloth soaked in diluted white vinegar.

Mix a solution of equal parts distilled water and white vinegar.Dip a microfiber cloth in the solution and use it to gently scrub the soleplate, especially scorched, sticky, or dirty areas. Once the soleplate is clean, wipe off any remaining vinegar with a clean, damp cloth.

Or, to avoid rubbing, soak the cloth in the vinegar water mixture and wrap it around the base of the iron for 30 minutes. Then, take out the cloth and dry the soleplate.

Use diluted vinegar to clean the compartment and unclog the iron’s steam holes.

Empty the tank of old water, then fill it about ⅓ full with a mixture of 3 parts water and 1 part distilled white vinegar. Turn the iron on the hottest setting and wait a few minutes for the iron to heat up. Then, iron an old towel or cloth with steam for a few minutes.

Use towels or fabrics that you throw away or don’t use. If there is significant residue in the steam holes, the iron may leave streaks or residue on the fabric.

Read your iron’s instructions to make sure you can use vinegar before trying this method.

3. Dryer sheets

Rub dryer sheets on the warm soleplate to remove residue.

Plug in your iron and set it to the lowest available temperature setting, then let it warm up for a few minutes. Take a few new sheets of dryer sheet and rub it on the soleplate as if you were using a sponge. Rub gently continuously until all dirt and residue is gone. Then, turn the iron to the highest setting and iron on an old towel to remove residue from the dryer sheet.

To protect your fingers, wear heat-resistant gloves or change dryer sheets when you feel your fingertips getting hot.

4. Toothpaste

Dab toothpaste on the residue on the soleplate and wipe clean.

Apply a little toothpaste directly to the brown, sticky or dirty stains and let it sit for about a minute. Then, use a clean towel to wipe off the toothpaste. Fill up the reservoir with fresh water, set the iron to steam mode and place the iron on an old towel or cloth for 5 minutes.

Also, try a mixture of 1 tablespoon (3g) toothpaste, 2 tablespoons (6g) baking soda, and 3 tablespoons (45mL) vinegar.

5. Salt

Iron on newspaper and salt to clean sticky iron.

If you notice that your iron is sticky when in use, sprinkle salt on a piece of newspaper or something waxy like parchment paper. Set the iron to warm, let it heat for a few minutes, then iron over the salt in all directions until the iron is clean.

Once the stickiness is gone, shake off the excess salt for a clean base. Use a damp cotton swab to wipe away salt stuck in the steam holes.

6. Ice cubes

Harden the melted plastic residue with ice, then scrape it off.

Fill a shallow bowl, plate or pan with ice cubes, then place the iron plate on the ice to let the melted-on plastic set and harden (this will take about 10 minutes if the melted-on plastic is new). Once the melted-on plastic has completely hardened, use a blunt plastic knife to scrape the resin off the base.

Do not use metal knives or other metal objects as they may scratch or damage the iron.

Our social channel: Baby & Mommy

SEE MORE: TIPS AND HACKS

Bathroom Mold Removal—The damp and humid environment provides the ideal conditions for these unwelcome guests. But fear not! With the right knowledge and strategies, you can bid farewell to bathroom mold and keep it from making a comeback.

1. Preventative Ventilation:

– Use exhaust fans and open windows during and after showers to reduce humidity and promote ventilation. Mold thrives in stagnant, damp air.

2. Regular Cleaning Routine:

– Develop a consistent bathroom cleaning routine. Wipe down surfaces, including walls and ceilings, with a mold-fighting cleaner. Don’t forget to scrub tile grout and sealant to prevent mold from taking hold.

3. Natural Mold Removers:

– Create a natural cleaning solution using equal parts white vinegar and water. Spray this mixture on mold-prone areas and let it sit for 15 minutes before scrubbing away the mold.

4. Silicone Sealant Maintenance:

– Inspect and replace any damaged or deteriorating silicone seals around your bathtub and shower. Proper sealing prevents moisture from seeping in and causing mold.

Bathroom Mold Removal- Tricks for a Mold-Free Bathroom

– Baking Soda Scrub: Make a paste with baking soda and water and use it to scrub away mold from grout, tiles, and other surfaces. Rinse thoroughly.

– Tea Tree Oil: Mix a few drops of tea tree oil with water in a spray bottle. Spray this natural antifungal solution on mold-prone areas, leave it for a few hours, and wipe clean.

– Reduce Clutter: Minimize the number of items in your bathroom to prevent mold from hiding in hard-to-reach spots.

With the right approach, you can reclaim your bathroom from the clutches of mold and mildew. Regular maintenance, proper ventilation, and natural cleaning solutions are your allies in this battle. We hope this guide has armed you with the knowledge and strategies needed to enjoy a clean, mold-free bathroom.

Remember, a mold-free bathroom not only looks better but also contributes to a healthier living environment. Say goodbye to unsightly mold, musty odors, and the hassle of scrubbing away mold constantly. Instead, say hello to a fresh, clean, and welcoming bathroom. Happy cleaning!

Your carpet will naturally collect dirt and dander over time, so you need to vacuum it often. Depending on how heavily it’s used, vacuuming once or twice a month will likely be enough for maintenance. Choose a vacuum with a suction attachment, which will clean your carpets better than a standard rotary vacuum.

Do deep cleanings every few months to go beyond the scope of a quick vacuum job and get your carpets good as new.

One big caveat: Wall-to-wall carpeting and area rugs aren’t the same things, so don’t assume you can use the same cleaning methods. Make sure your rug can handle a deep cleaning before you begin. If you have a vintage rug or one made of delicate materials, you’ll want to take it to get hand-washed with a pH-balanced shampoo every three to five years.

In addition to deep cleaning, you’ll also want to rotate your rugs. “It helps to rotate your rug once a year to ensure even wear over time” . “And use a rug pad, which will prolong its life. If it’s a wool rug, let it sunbathe once a year.” Sun helps sanitize wool, but be careful of color fading. And whatever you do, avoid steam cleaning because it will damage the carpet.

Before you begin

When creating a game plan for how to clean your carpet, carefully read the labels on all products you plan to use. Typically, the label will let you know if (and how) you should test on a small, inconspicuous area to ensure you don’t accidentally harm your whole carpet.

Once you’ve treated a small section of your carpet, wait a few hours to make sure there’s no adverse reaction such as a change in the color or texture of the fibers—before you proceed to clean the rest of your carpet.

How to do a routine cleaning

People with allergies and asthma understand the importance of regular carpet cleanings, but even if your immune system doesn’t alert you when your carpet is filthy, you’ll want to do routine cleanings. Plus, if you spill something on your carpet, you’re going to need to treat the stain immediately.

Vacuum your carpet

Start by vacuuming your carpets and rugs a couple of times a month to remove dust and dander. And if you’re getting ready to deep clean or spot clean your carpets, you’ll want to vacuum first every time. Debris stuck in the fibers can block your ability to get through to those stains.

Hyman also suggests shaking out your rugs a couple times a month. Every few months, flip your rug over and vacuum the back. “This will get the grit out of the foundation of the rug,” he says.

Spot clean your carpet

It’s important to know how to clean a carpet by hand. You’ll thank her for the tips the next time you need to remove gum or chocolate stains from a carpet.

Get pet hair out of a carpet

Pet hair can be a nightmare to remove, but there’s a trick that will save you tons of time: Sprinkle the area with baking soda; then vacuum it up. The baking soda will lift the pet hair from the carpet.

Get pet stains out of a carpet

They look bad and smell worse, but stains from your pet’s accidents are pretty easy to remove. Here’s how to clean dog pee from carpet: Use a paper towel to blot up as much of the urine as you can. Then mix equal parts white vinegar and warm water in a spray bottle. Spritz the area to get rid of the odor. Blot this mixture with a paper towel once again.

If that doesn’t do the trick, try one of these products specially formulated for getting pet urine out of carpets.

Get blood out of a carpet

Nosebleeds, household injuries… We get it. Bloodstains are tough to avoid and even harder to get out of carpets. Thankfully, you have options.

Maker uses a mixture of two parts hydrogen peroxide and one part dish soap. Wet a cloth with the mixture; then blot the stain with it. You can also try removing bloodstains by mixing cold water and white vinegar, then soaking the stain for a few minutes before using a paper towel or microfiber cloth to blot it.

Get wine out of a carpet

This stain in particular often triggers panic, but if you’ve spilled red wine, there’s hope for your carpet yet.

To clean up a red wine stain, blot up as much as you can. Then sprinkle salt or baking powder (generously) on the stain, giving it a few minutes to settle before you vacuum it up.
Get paint out of a carpet
Craft project gone awry? It may look bleak, but paint is actually easier to remove than it sounds. This is how you get paint out of carpet: First, identify the paint. Is it oil-based or water-based? Water-based paints will be much easier to clean up since many are water-soluble.

How to deep clean your carpet

Regularly running the vacuum over your carpets is great, but that’s not going to give your carpets a just-like-new look. That’s why you need to deep clean them a few times a year.

Deep clean by hand

Using a carpet-cleaning machine is your best bet for a thorough clean. If you don’t own one and don’t want to rent one, there’s a DIY solution.

Sprinkle baking soda over the surface of your carpet.
Mix carpet shampoo (that you’ve color tested) with warm water; then add the mixture to a spray bottle.
Spray the cleaning liquid over the carpet.
Brush with a carpet brush.
Blot the area.
Spray again with warm water only.
Blot the carpet again.
Yes, it’s time-consuming, but it’s more cost effective than buying or renting a carpet-cleaning machine.

Use a carpet-cleaning machine

Carpet-cleaning machines get a bad rap for being big and bulky, but these days, there are smaller machines that can really simplify carpet cleaning. If you don’t see yourself using a carpet-cleaning machine that often (or if you don’t have the room to store it), you can rent one from your local home improvement store.
Remove furniture and anything else on the carpet.
Vacuum the area to pick up loose dirt.
Pretreat stains that will need extra attention (and remember to do a color test before using a new cleaning solution).
Choose the formula to add to your cleaning machine (Pro Max Clean and Protect will do the trick).
Start your engines! Begin in the farthest corner of the room (so you don’t get trapped mid-room surrounded by wet carpet). Pushing your cleaning attachment forward and backward with the spray button pushed down. Follow that with the same movement without the spray button pressed. Do this throughout the space until you’ve cleaned the entire carpet.
Rinse. You don’t have to, but it’s a good idea to refill your machine with warm water and repeat the process.
Let it dry. Wait four to six hours before putting your furniture back or walking on the carpet.
Hire a pro
If you’re not up for renting or buying a machine, and if a stain is really stuck on or your carpet looks like it’s on its last legs, the answer to how to clean a carpet may be to hire a pro. Professionals use detergents and steam to really get in there, and commercial machines are beasts when it comes to getting bacteria and dirt out of any pile of rug. If your home has wall-to-wall carpeting, you might want to do this once a year.

Before you go the chemical route to clear a slow-moving drain, try baking soda and vinegar. Pour a cup of baking soda into the drain, then heat up a cup of vinegar and pour it on top of the baking soda. After approximately 10 minutes, flush with a pot of boiling water. (Don’t use this solution on a clogged drain.)

All-Natural Oven Scrub

A dirty oven can pose a serious cleaning challenge. Avoid corrosive chemicals and toxic odors by whipping up a baking soda and salt paste made with water or vinegar. Spread the paste over the floor, walls and oven door using a brush. (Be sure to wear gloves when you do this!) Let the mixture sit for about 24 hours, keeping it moist with a spritz of water or vinegar periodically. The paste will help soften the burnt-on food and make scrubbing your oven a bit easier. Wipe the paste away with a sponge or cloth, then turn on the oven to around 100 degrees F. Keep it on for an hour to soften any lingering residue. Turn the oven off, then once it’s cool to the touch, spritz any stubborn areas with vinegar and wipe down.

Scour a Ceramic Stovetop

Baked-on food residue tends to build up on cooktops no matter how hard you try to keep them clean. Luckily, a paste of warm water and baking soda spooned onto the surface will help loosen the residue. Let it sit for several minutes, then scrub to remove the gunk. Finish by spritzing with glass cleaner, then wipe dry.

Shine-Up Stainless Steel

If your stainless-steel sink is looking dull, sprinkle baking soda onto a soft cloth and buff it back to life. Rinse well after buffing. Avoid harsh, powdered cleansers, as they may scratch the sink’s surface.

Refresh the Refrigerator

It’s easy for crumbs and spills to gunk up your fridge in no time. Remove those mishaps with a paste of baking soda and dish soap. Use a scrub sponge to get up stubborn spots, then wipe away the mixture with warm water. Be sure to microwave your sponge for two minutes after use to keep it from harboring germs.

Quick Scour a Slow Cooker

Getting caked-on food out of your slow cooker doesn’t have to be a headache. Just fill the pot with water, then add 1/4 cup of baking soda and cook on high for three to four hours. The heated mixture will soften up any crusty residue. After a few hours, pour the water out, then lightly dust the inside of the pot with baking soda and scrub well. With a clean, damp cloth, rinse and wipe the pot out. You’re now ready for your next recipe!

Pretty-Up Tarnished Silver

Line a pan with aluminum foil and place silver pieces on top of the foil. Next, bring a pot of water to a boil, then turn off the heat. Add baking soda into the hot water and stir. Once the chemical reaction kicks in, the water will become foamy. Next, pour the baking soda mixture over the tarnished pieces, and let them soak for about 10 minutes. This reaction causes the tarnish to change back to silver, while the sulfur attaches itself to the foil. Give the chemical reaction time to do its thing! When the pieces are ready, remove them with tongs, then rinse and dry each piece with a clean towel. Lightly buff each piece to a gorgeous sparkle.

Deodorize a Front-Load Washer

Front-load washers look great, they’re more efficient and they use less detergent than a traditional top-loading model, but they’re also prone to smelling funky over time. Pour a half cup of baking soda into the detergent cup, then run a wash cycle with hot water to cut soap scum and deodorize the machine. A clean machine ensures your laundry smells its best, so deep-clean it monthly.

Clean Toilets

You’ll need a 1/2 cup of baking soda, 1/2 cup of borax and 1 cup of vinegar. Pour the vinegar onto the toilet stains, then sprinkle with the baking soda/borax mixture. Let it sit for about 20 minutes, then scrub and flush.

Blast Nasty Grout

Baking soda paired with warm water and bleach will knock out stubborn grout stains on tile floors and walls. If you need heavy-duty cleaning, amp up the bleach (but wear gloves to protect that manicure).

Remove Carpet Stains

If you’ve got an unsightly spot on your area rug or carpet, sprinkle it with baking soda to wick out any excess moisture. Let it sit for a few minutes, then vacuum it up. Next, blot the stain with 1 cup of warm water mixed with 1 tablespoon of vinegar, working from the outside edges inward. Blot until the stain has transferred from the carpet to the cleaning cloth, then allow to air dry.

Wipe Down Outdoor Furniture

The gentle abrasiveness of baking soda is perfect for cleaning stains off painted outdoor furniture. And a baking soda mixture works well on outdoor fabric stains, too.

Cleaning gone wrong

You probably feel good after you complete a household cleaning task; it’s not much fun, but needs to be done and is definitely beneficial. Or is it? Frustratingly, there is a right and a wrong way to clean. Find out if you’re making any of these mistakes that could actually be sabotaging your home’s cleanliness.

Mistake 1: Using the same rag around the house

Why it’s dirty: Despite spritzing it with a cleaning solution, when you use the same rag in multiple spots around the house, the rag hangs on to the grime from the previous surface and spreads it to whichever surface it touches next. That means bathroom germs get wiped onto kitchen counters, the living room coffee table, and anywhere else that cloth is used, definitely making this one of the ways you’re cleaning your kitchen all wrong.

How to fix it: Use a new wad of paper towel for each surface cleaned, or have a microfiber cleaning cloth designated for each area of your home. Microfiber cleaning cloths can be tossed in the laundry or thoroughly washed after each use to remove gunk or grime.

Mistake 2: Using a feather duster

Why it’s dirty: No matter how much the advertisements for these dusters say the feathers “trap and lock dust,” they don’t. Feather dusters are notorious for spreading dust around a surface or pushing it off to fall to the ground, rather than removing it.

How to fix it: Use a microfiber cleaning cloth or a disposable paper towel with an appropriate cleaning solution, depending on the surface being dusted. The idea that feather dusters actually “dust” is one of the common cleaning myths you can stop believing.

Mistake 3: Not cleaning the vacuum

Why it’s dirty: When a vacuum filter hasn’t been changed or cleaned in a while, not only is the vacuum unable to pick up as much dirt and dust as it should, due to decreased suction, but dirt also is blown back into the air and carpet by the dusty vent.

How to fix it: Change or empty vacuum bags or canisters immediately after they become full. Wipe vacuum attachments, the hose, and the vent with either a damp microfiber cleaning cloth or a moist paper towel, double-checking that the vacuum is unplugged first.

Mistake 4: Tossing any kitchen tool into the dishwasher

Why it’s dirty: Smaller kitchen tools like a garlic press, zester or cheese grater have small nooks and crannies that a dishwasher isn’t always able to blast. When food is left in these tools, it can become moldy and get into food the next time it is used.

How to fix it: Skip the dishwasher and wash by hand with dish soap and hot water, paying particular attention to corners and small holes. You can also try these other helpful cleaning tips for hard-to-clean objects.

Mistake 5: Placing a toilet brush back into its holder immediately

Why it’s dirty: If a toilet brush is put right back into its holder right after use, the moisture and germs from the toilet get trapped in the container and the brush, where they breed and multiply. These germs are then rubbed back into your toilet the next time the brush is used.

How to fix it: After scrubbing, allow the toilet brush to dry completely before returning it to its holder—voilà, you’ve eliminated one of the most common ways you’re cleaning your bathroom wrong. However, maybe it’s time to ditch the toilet brush entirely. If you’re not interested in keeping and cleaning a toilet brush, try out a toilet wand with disposable heads instead.

Mistake 6: Skipping the sink

Why it’s dirty: Whether it has a standard drain or a garbage disposal, sinks rapidly grow germs and bacteria due to being a moist environment where food particles tend to get stuck. This issue is compounded when food or standing water is left in the sink, the drain or the garbage disposal.

How to fix it: Wipe down the sink after each use. You should also try out these home cleaning hacks from professional house cleaners.

Mistake 7: Cleaning from the ground up

Why it’s dirty: When sweeping, mopping or vacuuming the floor before cleaning the furniture, dust, and crumbs fall from tables, counters, and shelves, requiring you to re-clean the floor.

How to fix it: Clean a room from the top down. Start with windows, working down to tables and counters, chairs and couches, side and coffee tables, ending with the floor. You’ll also want to try these 35 nearly forgotten house cleaning tips from the past.

Mistake 8: Spraying cleaner directly on a surface

Why it’s dirty: Spraying a cleaner directly onto furniture, countertops or glass can cause a buildup of the solution, leading to greasy furniture and surfaces, and streaky windows. This also could cause dirt and dust to stick to them more firmly.

How to fix it: Spray cleaning solution on a microfiber cleaning cloth or disposable paper towel, then wipe down surfaces. Don’t miss these household products that kill the coronavirus.

Mistake 9: Not cleaning the washing machine

Why it’s dirty: The skin cells, dust mites, and stains from clothes can linger in a washing machine drum as well as on the lid or door and detergent dispenser. This leads to washing clothes in dirty water, and eventually, they’ll turn stinky.

How to fix it: For a top-loading washer, start it on its longest and hottest wash setting. When the drum is nearly full of water, pour in 1 liter of vinegar and 1 cup of baking soda, leaving the lid open and allowing the mixture to sit in the paused cycle for at least an hour. While the cycle is paused, clean the lid and any other visible nooks and crannies. Close the lid, allowing the wash cycle to run. Repeat vinegar and baking soda wash, if needed, then wipe down the inside of the washer and leave the lid open to allow the washer to dry completely.

For a front-loading washer, pour a solution of 1/4 cup each baking soda and water into the detergent compartment and pour 2 cups of vinegar into the drum. Set your machine to the hottest temperature and let it do its thing. When the cycle is over, wipe the drum clean, along with the door, detergent compartment, and exterior. Pay extra attention to the gasket. Remember to leave the door ajar between loads for the best air circulation. Bet you didn’t know that you should absolutely be adding these ingredients to your laundry.

Mistake 10: Washing a cutting board with dish soap

Why it’s dirty: While dish soap and hot water remove visible food residue from a cutting board, the cuts in wood and plastic cutting boards trap microscopic food particles. These breed bacteria that transfer to any foods you prepare on that cutting board.

How to fix it: Don’t put it in the dishwasher! A wooden cutting board can warp and crack, while a plastic cutting board can melt in the hot water and steamy environment of a dishwasher. Instead, soak your cutting boards in hydrogen peroxide or a bleach solution (2 tablespoons of bleach and 1 gallon of water), rinse with water and dry completely.

1. Scrubbing the Toilet Bowl

So how do we safely dispose of broken glass, and can we recycle broken glass? Unfortunately, broken glass cannot be recycled in most cases, but check with your local recycling center to confirm. For more details about broken glass disposal, continue reading to learn more about the steps to take to avoid potential hazards.

BEFORE YOU BEGIN

Glass shards can be very sharp. They are also often very tiny and may have scattered throughout the room where the item broke. Before you begin to clean up and dispose of broken glass, remember to work very carefully.

Confirm that all of the pieces are picked up before figuring out how to throw away broken glass or recycle it if your municipality allows it.

STEP 1: Wear puncture-proof gloves and close-toed shoes.

Shards of glass are very sharp and smaller shards may be hidden amongst larger pieces. These pieces could break the skin and cause an injury, so protecting your hands and feet before you begin the clean-up process is essential.

If you are barefoot or wearing sandals, change into a pair of closed-toe shoes to make sure your feet are protected if you accidentally step on a piece of glass. Protect your hands from injury when picking up glass pieces by putting on a pair of puncture-proof gloves.

STEP 2: Collect the broken pieces in a small cardboard box.

Once your feet and hands are protected, find a small cardboard box to hold the pieces of broken glass. Carefully pick up all the glass pieces and put them in the box. Remember, glass shards can be very tiny, so you’ll need to look carefully around the entire area where the breakage occurred. You can look for smaller pieces of glass by shining a flashlight on the floor. The glass pieces will reflect the light, allowing you to see them more easily.

If there are larger pieces of glass that are too big to fit into the cardboard box you’re using, safely break them into smaller pieces. To do this, carefully wrap any larger piece of glass in an old towel or cloth, take it outside, and tap on it lightly with a hammer to break the glass into pieces.

STEP 3: Seal the box and label it.

Once you have collected all the pieces of broken glass and placed them in the cardboard box, the next step is to seal the box. Use packing tape on the seams to ensure the seal is secure so glass pieces won’t find their way back out of the box.

After sealing the box, add a label to alert others of its contents. Use a thick black or red marker to write “Danger: Broken Glass” on the top and sides of the box. This way, if the refuse collectors or anyone else handles the box, they will know to do so carefully.

STEP 4: Place the box of broken glass inside a garbage bag and put it in your regular trash bin for pickup.

The final step for how to dispose of broken glass is to place the sealed and labeled box in a trash bag. Then, place the trash bag in your garbage can to bring it down to the curb for your weekly pickup.

If your trash collection date is still a few days away, you may consider placing the box of broken glass on a shelf in the garage or a high shelf in your home to prevent it from getting tossed around in the can as other trash is added. Should you decide to do this, write yourself a reminder note and tape it to your trash can so you don’t forget to take the box of broken glass out with the rest of the trash on trash day.

Learning how to dispose of glass properly can help prevent accidental injury to either yourself or another person like a family member or your refuse collectors. Remember, broken glass is very sharp, so always wear protective gloves and closed-toe shoes when cleaning it up. Place the broken glass pieces in a box, and then seal and label the box before adding it to the trash can. Following these steps will make it less likely that the broken glass pieces will hurt someone.